:

        (    ZyXEL 1496*, GVC-1440)

AT&F0           Factory setting
                  ZyXEL     
                Enter  Data/Voice

ATZ0             profile 0
AT&V             setup
AT&W0            setup  profile 0
AT&Y0              profile 0

ATE0             

atdp          

+++                 connect'   
ATO                  CONNECT
ATH              

ATA                   
ATS0=2             2- 




AT&P1           Make / break 33/67 (Europe)

ATQ0              
ATV1              



AT&L1              
AT\N5               MNP5  V42bis
ATB6              2400  
ATL0              
ATM0            Speaker always off



B_      B1 Bell mode                (*)
        B2 Autoscan mode

D_      R originate call in answer mode
        W whait for second dialtone
        , pause
        @ wait for 5 seconds silence
        ! flash
        ; return to command mode after dialing

H       1 make busy

I [0-4] info

L       2 medium speacker

M       0 internal speacker off
        1 internal speacker on until carrier
        2
        3

O       0 return to data mode
        1 return to data mode and initiate equaliser retrain



s0 autoanswer ring          0
s1 ring counter             0
s2 Escape code character    +
s3 CR character             13
s4 LF character             10
s5 BS character             8

S6 dial tone whait time      2 sec
S7 remote carrier whait time 45 sec
s8 comma pause time           2 sec
s9 carrier dettect responce time 6  *1/10 sec
s10 carrier loss time         14   *1/10 sec
s11 touch tone dialing speed  95   ms
s12 esc character detect time 50   1/50 sec

s14 bitmap

s16 bitmap

s18 modem test timer          0
s21 bitmap
s22 bitmap
s23 bitmap

s25 DTR delay             5 sec
s26 RTS to CTS delay interval     1   *1/100 sec
s27 bitmap
s28 bitmap

Last-modified: Fri, 27 Oct 1995 12:43:50 GMT
: