CD ( LaserROM) "Instant
Information"
SupportLine: http://europe-support.external.hp.com
Trusted passwords, :
/tcb/files/auth/system/default/r/root
/etc/PATH,SHLIB_PATH,MANPATH
dtlogin:
/usr/dt/bin/dtconfig -
/etc/dt/bin/dtconfig -
# /usr/dt/bin/Xsession - -
# /usr/dt/bin/Xsession.d/*
/etc/dt/config/Xsession.d/* - X-,
/etc/profile
User Space ID 32bit + 64bit Virtual
HP-9000 FW, Diff, SE
/var/adm/sbtab
tunefs -v
mediainit -
( bad-block )
PFS - CDROM- . : pmount
LOFS - Local fs
HFS - 4-64Kb, 1/8, cilinder group
JFS - 1Kb allocation unit
OnLine JFS == Advanced VxFS
fsadm, setext
Defragmentation
Expantion/contraction
Snapshot => backup
man fs_vxfs
man inode_vxfs
inod 256 , < 96
1. 64-. ( fiatures)
: Only 32. 32+64 .
Backward compatibilyty ( 10.xx,
32- 64- ,
32 64 32 64 .
2. - DLKM ( )
3. tcp/ip streams .
tcp/ip , .
- IP-aliasing, NFS,
- DNS, sendmail
)
4. boot-loadera. ISL LIF,
LIF- ISL-, CMOS
5. . ( -
, ..)
6. .
64- 2Tb
> 4. - 16k, 256k, 1Mb, 4Mb, 16Mb
7. 64- V-class.
( , 32- V )
, .
, - .
8. HP-11 - -
HP-9000.
11 - 11.00 PA-RISC32/64 1997-2004
11i v1.0 - 11.11 PA-RISC32/64 2000
11i v1.5 - 11.20 IPF 2001-2003
11i v1.6 - 11.22 IPF 2002-2004
11i v2.0 - 11.23 IPF 2003
11i v3.0 - 11.31 PA-RISC64+IPF 200?
IPF 11i - kcweb
cell - 1-4 , 16 RAM cell controller
cell low latency crossbarr with
crossbar controller
cell IO- PCI node
partition nPar - ,
reboot .
nPar - , ,
# parstatus w
The local partition number is 0.
MP
^B, co,
GUI - parmgr, MP
vPar - - nPar
, .
^A
# vparstatus w
The current partition is vpar0
:
0/0/1/0/0.6.0
Cell Number (partitionable servers only)
SBA Number Service Bus Adapter
LBA Number Local Bus Adapter
PCI Address
Function Number ( multifunction )
SCSI Target Address
LUN Number
MP> cm Command Menu
MP:CM> ls Display current LAN console port status
MP:CM> lc Change the LAN console configuration
MP:CM> el/dl Enable/Disable the LAN console port
MP:CM> di Terminate all current remote logins, but don't disable interface
MP:CM> dc Reset the MP configuration to the factory defaults
MP:CM> ca Configure async/serial ports (terminal settings, etc.)
MP:CM> er Enable or disable the remote support modem
MP:CM> mr Terminate all modem connections with a modem reset
MP:CM> ms Display current remote support modem status
MP
MP:CM> so Modify login timeout values and settings
MP:CM> so or uc Create/modify/remove MP user accounts
MP:CM> who Determine which users are currently logged into the MP
MP:CM> te Send (tell) a message to other logged in MP users
If you forget the MP Admin user's password, execute the dc command or press
the reset button on the MP card. Doing so removes all of the MP users, dis
ables the remote support modem, and resets the LAN console interface parame
ters to their factory default values.
MP:CM> rs Reset
MP:CM> tc Crash dump, then reset
MP:CM> ps View current system power status
MP:CM> pc Power system up or down (MP access is retained)
Last-modified: Sun, 14 Mar 2004 05:49:39 GMT